Thank you!

Your request has successfully been sent.

Customers Testimonials

We’re grateful for the kind words our clients share about us, and we sincerely thank each and every one of them for their support!

Starting a new mask production with the help of Comairco!

During challenging times, some clients continue to innovate—and Plastiques GPR is a great example. This injection plastic company took the initiative to design and produce reusable masks made from fabric and plastic. This impressive achievement required key adjustments to their compressed air system. Comairco proudly supported them in adapting their production to meet this new demand.

Here’s a short video that showcases how they launched their mask production in response to the fight against COVID.

Sullair Compressor room

A well established and respected company in the lumber industry is proud to partner with Comairco and Sullair

In the fall of 2012, we reached out to Comairco because we were determined not to go through another winter dealing with frozen lines and cylinders. At the time, we were also facing issues with our existing compressors.

To begin, Comairco’s sales representative recommended data logging our system to gain insight into our actual usage and demand. The results of that analysis provided the direction we needed and laid the foundation for the success we’re experiencing today.

Sullair V200

In addition to data logging, we decided to provide in-house training to better educate our maintenance staff on the fundamentals of a compressed air system. The Comairco team played a key role in this effort, helping us build our team’s knowledge and technical capabilities. Through this training and support, we were able to identify the root causes of our system inefficiencies, including why our air dryer was struggling to meet demand.

In the winter of 2013, we made the decision to partner with Comairco for the servicing of our existing compressors and air dryer—one of the best decisions we’ve made. Comairco completely rebuilt our dryer, and as a result, we successfully made it through that winter without any issues in the plant.

After further reviewing our system’s architecture with Comairco’s sales representatives, it became clear that adding a 500-gallon vertical air receiver before the dryer would improve performance. Once the tank was installed, we no longer experienced issues with the desiccant beds—a long-term solution that has proven to be highly effective.

Sullair Compressor Room

In the summer of 2013, we encountered a major issue with the air end on our primary compressor. After evaluating our options, it became clear that the cost of repair outweighed the cost of replacement. We reached out to Comairco for a quote on a new Sullair compressor.

Our Comairco sales representative took the time to explain the advantages of a variable speed drive (VSD) compressor. Based on the potential energy savings and improved efficiency, we chose to go with the VSD model—which, notably, was 50 HP smaller than our previous unit.

This turned out to be another excellent decision. We also had the opportunity to work with the Infinity Piping system, and the results were impressive. Despite being smaller, the new Sullair compressor consumed less energy and operated far more efficiently than our old unit.

At last, we were on a clear path toward a reliable and energy-efficient compressed air system.

Sullair Dryer for Compressed Air

In the spring of 2014, we began exploring the potential benefits of a refrigerant dryer. The Comairco team visited our site to review the scope of work and walk us through the advantages. Based on their analysis, we determined that the projected electrical cost savings alone would justify the investment within two years.

After installing the refrigerant dryer, we were pleasantly surprised by the actual savings. To better quantify the impact, we installed flow meters and conducted our own in-house data logging. The results confirmed that the refrigerant dryer was saving us approximately $2,000 per month during the warmer months of the year.

However, when winter arrived, we were forced to revert to our non-heated dryer—something we wanted to avoid. This sparked a discussion around switching to a heated blower purge drying system. Once again, Comairco’s sales representatives took the time to explain the benefits of the system in detail. As a result, in the fall of 2015, we replaced our outdated desiccant dryer with a new heated blower purge dryer.

The results were remarkable. During the winter of 2015–2016, for the first time in the history of our operation, we were able to run the plant with only one 200 HP compressor. We no longer needed to run two 250 HP units all winter—a major improvement in both energy efficiency and reliability.

Our partnership with Comairco has been one of the most successful collaborations we’ve had. It has significantly elevated our understanding of compressed air systems, and we are truly grateful to have companies like Comairco and Sullair as trusted partners in our network.

Sullair Oil Free Compressor

Success Story: Hitachi Oil-Free Variable Speed Drive Compressor

 

Following the supply and installation of the Hitachi oil-free air compressor by Comairco last year, I want to express our complete satisfaction—not only with the outstanding performance of the compressor itself but also with Comairco’s seamless coordination throughout the delivery, installation, and commissioning process. Their team kept us informed at every stage, making the entire experience smooth and hassle-free.

We were also impressed by Comairco’s rapid response when one of our primary compressors unexpectedly went down. They promptly delivered an oil-free 320 HP variable speed drive water-cooled compressor on very short notice, minimizing downtime and ensuring continued operations.

Our interactions with your service department have further reinforced our confidence that Comairco stands firmly behind their products and customer commitments.

Please consider this letter a wholehearted testimonial to our satisfaction. We offer it without reservation in support of Comairco’s pursuit of business with other firms and institutions.

Sulair 1050 portable air compressor

Success story with a portable compressor

 

This letter serves as a reference for any firm considering doing business with Comairco.

In the fall of 2010, we took delivery of a 1600 CFM portable compressor and a large construction-grade desiccant compressed air dryer from Comairco Ltd. This system is used for purging water from gas lines across the province. Since installation, the equipment has performed reliably and consistently, and we are very satisfied with its operation.

We have also been pleased with Comairco’s after-sales support and service, including the on-site training provided to our team following delivery. This training greatly enhanced our ability to operate and maintain the equipment effectively.

Initially, our plan was to purchase an oil-free compressor, which carried a significantly higher price tag. However, the Comairco sales representative advised us that an oil-cooled screw compressor with proper filtration would more than adequately meet our needs—and this has proven to be the case. The equipment specified has exceeded our expectations and effectively fulfills the demands of our process.

We are so satisfied with both the equipment and the Comairco team that we would not hesitate to purchase additional equipment from them or recommend Comairco as a trusted compressed air supplier to other companies.

SRL16.5_Hitachi oil free Sullair Air Compressor

Manufacturing medical devices, success story

We chose Comairco to install new compressors for our new building in 2015. Their extensive technical knowledge of compressed air systems was invaluable in helping us select the right equipment to support the manufacture of our medical devices.

Comairco provided and installed 44 HP, 145 PSIG Hitachi oil-free air compressors, a 150 SCFM single-tower desiccant dryer, a 240-gallon vertical wet tank, a 500-gallon vertical dry tank, and the necessary controllers. They expertly connected the equipment to our main header, ensuring a seamless integration.

A year later, we engaged Comairco again to upgrade the air compressors in our existing building. This time, they supplied 88 HP, 145 PSIG Hitachi oil-free air compressors, a 200 SCFM single-tower desiccant dryer, two 240-gallon vertical air receivers, and an updated controller.

The equipment arrived on schedule, and Comairco facilitated air quality testing after installation. Any issues that arose during setup were addressed promptly, allowing us to switch over to the new compressors quickly and effectively eliminate compressed dry air shortages in the plant.

We are extremely satisfied with the service and positive experience working with Comairco, and we would confidently recommend their expertise to others.

Air tank installation by Comairco

We have been a customer of Comairco’s for approximately 15 years.

We were recently very impressed with Comairco’s rapid and efficient response when we urgently needed a loaner compressor. The procurement and installation of the rental unit were handled swiftly and seamlessly. For a plant of our size, minimizing downtime due to compressed air shortages is critical, and Comairco’s prompt support made all the difference.

In addition, Comairco recently supplied us with a 2,000-gallon air receiver equipped with a flow controller. This equipment was specified following a comprehensive air audit conducted by Comairco. Rather than simply recommending the addition of another compressor, their methodical approach addressed our compressed air needs more effectively. By installing the large receiver and flow controller, we were able to shut down a compressor, resulting in substantial energy and cost savings.

Comairco also provides ongoing service for our many compressors, and we are very satisfied with their support.

Please consider this letter as a strong reference for Comairco’s products, services, and sales team. I offer it without hesitation.

Sullair 400 HP

Sullair 400 HP so reliable

We are pleased to provide this testimonial letter, expressing our satisfaction with Comairco, the Sullair product line, and our ongoing partnership with your team.

At the heart of our compressed air system is the robust Sullair 400 HP tandem/twin-screw compressor. Purchased and installed through Comairco 16 years ago, this unit has logged over 100,000 hours of operation and has consistently proven to be exceptionally reliable. We believe this reliability is a testament not only to the quality of the compressor but also to the outstanding service Comairco has provided throughout the years.

When we recently purchased the Sullair compressed air dryer from you, our confidence in the Sullair brand—built on years of positive experience with the compressor—was a significant factor in our decision, despite the dryer not being the lowest-priced option available.

We offer this reference without hesitation and look forward to many more years of successful partnership with Comairco.

Sullair 7500 Air Compressor

Sullair perfect for us!

 

To whom it may concern:

I am the CEO of a large company producing meat.

We have been a customer of Comairco for many years. We recently purchased a new Sullair compressed air system from Comairco for a new plant that we will soon be opening.

In addition to providing us with reliable equipment, Comairco also services our existing Sullair compressors into all of our facilities.

We are very satisfied with Comairco and our sales representative from both equipment and a service standpoint. Our sales representative is always prompt to return our calls and diligent in recommending the optimum equipment for our operating environment.

We are pleased with our business relationship with Comairco and have no reservations in recommending them to other potential customers.

Old AWA compressor at ski station

Success Story at a ski resort

 

We operate a ski resort and have been working with Comairco for the past few years. I wanted to take a moment to share how impressed I am with the excellent support we’ve consistently received from their team. Their service has been reliable, responsive, and truly appreciated. I thought it was worth passing along these positive words to you.

Sullair 5500 air compressor

Testimonial from a furniture manufacturer

 

Our plant’s compressed air system consists of two 75 HP rotary screw compressors operating in a run/backup configuration. We first met with Comairco’s sales representative in December 2015, after our Manufacturing Manager reached out due to concerns that the compressors were running overnight—even when there was no production. We had also noticed that, during peak demand periods, both compressors were operating simultaneously, leaving us without a reliable backup.

This raised the question of whether we needed higher horsepower compressors to meet our air demands. However, after a thorough review of our load profile, Comairco’s representative correctly diagnosed the root cause as extensive air leaks throughout the plant. They advised that larger compressors were unnecessary and would not solve the underlying issue. After locating and repairing the leaks, we were once again able to meet all air demands using a single compressor—resolving both problems efficiently.

Earlier this year, we decided to replace one of the compressors and an air dryer. Comairco provided a competitive bid and recommended equipment specifically suited to our hot and dusty plant environment, with an emphasis on energy efficiency. The new system was delivered, professionally installed, and commissioned as promised—on time and without delays or excuses.

Parts Sullair after market

Ordering parts goes beyond expectations

Thank you again for all your support last week. I truly appreciated your professionalism during what was a stressful time for us. Your dedication to securing the parts we needed on time, along with your consistent and clear communication, went above and beyond my expectations. I look forward to working with you again in the future.

Tuthill  KT300 in Furnace App

Tuthill successful story

I want to sincerely thank you for the outstanding job you did in organizing and fulfilling our critical shipment from Tuthill Vacuum and Blower Systems in March 2019. Your attention to detail and commitment to meeting our requirements truly went above and beyond. We are extremely grateful for your efforts and professionalism. I look forward to working with you on future orders and benefiting once again from your expertise.

Industrial compressors

With more than 40 years of experience, Comairco is a true leader in North America.

Find out more

Used equipment

We have a wide range of air compressors, air dryers, tanks

and outdoor mobile stations designed for your air compressors,

as well as other used products in order

to help you out in emergency situations.

 

 

.

Find out more

Technical service

COMAIRCO offers an emergency compressed air maintenance and compressors maintenance service, 24 hours a day, 7 days a week. Our technicians are available around the clock to perform compressed air installation and compressors installation or repairs.

Find out more Camion Comairco